TANHON TRANSMISSION MACHINERY
NEWS
FAQ
1) Ensure protection against rain, snow, humidity, dust, and impact.
2) Use wood blocks or other materials to elevate the gearbox off the ground.
3) For unused gear units that have been opened, apply anti-rust oil to their surfaces before returning them to storage promptly.
4) If the gearbox has been stored for 2 years or longer, inspect cleanliness, mechanical integrity, and the presence of the anti-rust layer during regular check-ups.
Tighten the bolts on the gearbox surface and monitor the unit. If oil continues to leak, please reach out to our sales representative in the Foreign Trade Department.
After approximately 400 hours or 3 months of new gearbox usage, the lubrication should be replaced. Following this, the oil should be changed roughly every 4000 hours. It is important to avoid mixing different brands of lubricants. Ensure the gearbox housing contains an adequate amount of lubrication and conduct regular checks. If the lubricant is found to be degraded or the level has decreased, promptly replace or refill the lubricant.